Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 127)

Documenting Ladder Programs
7–11
Adding Instruction Comments
Adding an instruction comment is similar to adding a rung comment with the cursor
on the instruction.
1. To add an instruction comment to rung 0 press
CONFIG OFFLINE
CONFIG
DOCUMNT
F5
. The following
document functions appear:
Press a key for desired document function
(file 2, rung 0)
offline
no forces File EXAMPLE
F2
INSTRUC
COMMENT
F10
SAVE
DOCUMNT
F3
ADDRESS
COMMENT
F6 F7
MODIFY
SYMBOL
REMOVE
SYMBOL
F5
EDIT
DBASE
F1
RUNG
COMMENT
2. Locate the cursor on the instruction you want to add a comment to and press
CONFIG OFFLINE
CONFIG
INSTRUC
COMMENT
F2
. The following display appears:
Bit File
Enter instruction comment for: XIC,B3/10
(file 2, rung 0)
offline
Edit Mode: Insert Col: 1 Line: 1 File EXAMPLE
F9
NEXT
COMMENT
F2
UNDEL
COMMENT
F10
PREV
COMMENT
F3
DELETE
LINE
F6 F8
UNDEL
WORD
ACCEPT
/ EXIT
F5
DELETE
WORD
F1
DELETE
COMMENT
F4
UNDEL
LINE
INSTRUCTION: XIC
ADDRESS: B3/10
INS CMT
( )
B3
12
]/[ ] [
B3
10
B3
11
] [
B3
7
The window in the display area applies to the cursored instruction. The
comment
Bit File has been entered, but not yet accepted.