Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 279)

Preface
Advanced Programming Software User Manual
14–6
5. Once you have selected the file, press
CONFIG OFFLINE
CONFIG
BEGIN
F1
RESTORE . The existing online
processor file SEQUENCE will be overwritten by file EXAMPLE . While
EXAMPLE is being downloaded, the restore utility is displayed.
Press any key to continue
REM PROG L532 Series C Rev.2 PROC Addr 1
ROCKWELL SOFTWARE, INC.
9323 SERIES SOFTWARE
SLC-500 PROGRAM RESTORE UTILITY
File Name : C:\IPDS\ARCH\SLC500\EXAMPLE .ach
Processor Number: 1
A total of 4 data, 4 program, and 2 force table(s) created.
Downloaded 20 Words in 4 Data Files, 78 Words in 4 Program Files,
2 Words in 2 Force Tables.
There are 0 undefined data and 0 undefined program file(s).
The contents of the downloaded file is summarized in the display area. After
you have reviewed the summary display, press any key to continue. When you
do so, the program directory of processor file
EXAMPLE appears:
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 2
FILE PROTECTED NAME TYPE SIZE (words)
0 system 74
1 reserved 0
2 ladder 48
PROGRAM DIRECTORY FOR PROCESSOR: EXAMPLE
F1 F2 F6 F7 F3 F4 F8
PROCSSR
FUNCTNS
SAVE
RESTORE
CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
LINK ADR
MONITOR
FILE
F5
WHO
ACTIVE
F9
DATA
MONITOR
F10
MEMORY
MAP
From this point, you can place the processor in REM Run mode, monitor
operation, and perform other functions.