Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 389)

Preface
Advanced Programming Software User Manual
21–16
5. Press
CONFIG OFFLINE
CONFIG
UTILITY
F8
. The following display appears:
File Name: Prog Name:
File Name Type Size(Instr)
0 System 211
1 Reserved 0
2 Ladder 15
ONLINE WHO PASSWRD CLR_MEM
F1 F2 F3 F4 F5
6. Access the Who menu by pressing [F2]. This display shows you the active
nodes on the DH-485 network.
Node Addr. Device Max Addr./Owner
0 APS XFER (31)
1 500-20 (31)
2 5/02 (31)
3 APS (31)
4 TERMINAL (31)
Node Addr: 1 Baud Rate: 19200 OFL
DIAGNSTC ATTACH NODE_CFG OWNER
F1 F2 F3 F4 F5
7. Notice node 0 APS Xfer . This indicates that node 4 is waiting to receive the
program file. At this point, press
CONFIG OFFLINE
CONFIG
ATTACH
F3
. The message Going Online
will be displayed momentarily at the HHT.