Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 383)

Preface
Advanced Programming Software User Manual
21–10
3. Press
CONFIG OFFLINE
CONFIG
EMULATE
5/02
F7
. The status line displays an SLC 5/02 processor. Press
CONFIG OFFLINE
CONFIG
RECEIVE
PROGRAM
F2
. The Waiting to Receive Program screen appears.
Press Control-C to abourt
Term. Addr: 0 Emulation: 5/02
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 PROGRAM TRANSFER UTILITY
Waiting to Receive Program...
File Name : DEFAULT .ACH
Leave this menu displayed while you set up node 0 APS terminal to send the
program file, or press
[CRTL-C] to abort the procedure.