Preface, Dh+ who active – Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 250
Preface
Advanced Programming Software User Manual
12–16
DH+ WHO Active
The DH
+
WHO Active display allows you to view other active devices on the
network. DH
+
WHO Active works the same as DH-485 WHO, except valid node
addresses range from 0-77 octal.
Access the DH
+
WHO Active display by pressing [F5] Who Active from the APS
Online menu. The following display appears:
00
20
40
60
01
5/04 TEST
21
41
61
02
22
42
62
03
23
43
63
04
24
44
64
05
25
45
65
06
26
46
66
07
27
47
67
10
30
50
70
11
31
51
71
12
32
52
72
13
33
53
73
14
34
54
74
15
35
55
75
16
36
56
76
17
37
57
77 TERM
F2
Station
Diags
Press a function key
WHO ACTIVE - Active Station Identification
ESC exits
Node
F1
Online
Program
Device Type
Name of Program File
Address
Note that the station diagnostics option is only available when using a PLC
processor or when the cursor is on a terminal. If you try to access this function
when the cursor is on an SLC 5/04 processor the error message:
FUNCTION NOT
AVAILABLE
is displayed.
Note
The program name and program owner fields are only updated when you first enter
the DH
+
WHO function or when the DH+ node configuration changes. For
example, these fields are updated when another node appears or disappears from
the WHO screen.