Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 194)

Preface
Advanced Programming Software User Manual
10–22
The display area identifies the processor file, DRILL1 in this example, and
indicates the reports, their sizes, and the dates they were created. The cursor is
located on the Program Listing report.
3. If you want to select another processor file at this time, press
CONFIG OFFLINE
CONFIG
SELECT
PROCESS
F6
. This
returns you to the previous display.
4. Use the function keys to select the types of reports you wish to print. Asterisks
identify the selected reports.
5. After making a selection press either [ENTER] or
CONFIG OFFLINE
CONFIG
PRINT
FILES
F7
to initiate
printing.
6. If the printer is not ready the message PRINTER NOT READY appears. Two
options are available:
•
If the problem is external, such as forgetting a cable
connection, correct the problem and press
[F8] .
YES
F8
•
If the problem is something else, such as an incorrect
printer configuration, press
[F10] to return to the
previous display.
NO
F10