Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 69)

Preface
Advanced Programming Software User Manual
5–2
Processor Functions
This section shows you how to create an example processor file. The example file
is compatible with a modular controller consisting of:
•
Chassis 1746-A4 (chassis 1)
•
Processor 1747-L532 (slot 0)
•
Input Modules 1746-IA4 and 1746-IA8 (slots 1 and 2)
•
Output Module 1746-OA8 (slot 3)
The processor file name chosen for this example is EXAMPLE .
Creating Processor Files
1. Begin at the main menu and press
CONFIG OFFLINE
CONFIG
OFFLINE
CONFIG
F4
, then
CONFIG OFFLINE
CONFIG
CREATE
FILE
F6
.
2. At the prompt, type: EXAMPLE . EXAMPLE appears on the data/command
entry line. (File names can be a maximum of 8 characters in length.)
If you press [ESC] at this time, the error message: FILENAME MUST BE
SPECIFIED is displayed. If you press [ALT–U] , the previous display
appears.
BUL. 1761 Micrologix 1000
1747-L511 5/01 CPU – 1K USER MEMORY
1747-L514 5/01 CPU – 4K USER MEMORY
1747-L524 5/02 CPU – 4K USER MEMORY
1747-L532 5/03 CPU –12K USER MEMORY
1747-L541 5/04 CPU –12K USER MEMORY
F8
SAVE &
EXIT
NAME: EXAMPLE
F2 Processor: Bul. 1761 MicroLogix 1000
F5
CONFIGR
I/O
Press a Function Key or Enter File Name
CREATE PROCESSOR FILE
PROCESSOR
ESC exits/Alt–U aborts changes
INPUTS OUTPUTS
F2
SELECT
PROC
F6
ADJUST
FILTERS