Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 48)

Configuring Your System
3–9
5. Save the control string by pressing TO FILE
CONFIG OFFLINE
CONFIG
SAVE
F9
TO FILE . Once you have entered both
strings, press
CONFIG OFFLINE
CONFIG
SAVE
CONFIG
F9
, then [ENTER] or [ESC] .
Printer Control String Option
This option allows you to change the printer configuration for the current print
request. You can change the printer to condensed mode, the typeface, and the
characteristic of the typeface, such as bold or italic. Before using this option, we
recommend referring to the printer’s user manual for the correct printer control
sequences.
We recommend using the initial string and termination string together. This ensures
that the printer is reset to its previous setup mode for the next print request. Enter
the initial control string data first. It should not exceed 1 line of 160 printable
characters.
Control String Entry Priorities:
1. Enter the printable characters (hexadecimal values 20–7E).
2. Enter the control character (hexadecimal values 00–1F) by preceding it with the
control character, “^”. For example, hexadecimal value 12 (form feed) can be
entered as ^L.
3. Enter any character (hexadecimal values 00–FF) by preceding it with a
backslash, “\”. For example, <escape> can be entered as \027.
4. Enter any character (hexadecimal values 00–FF) by preceding it with an “x”
before the one or two hexadecimal digit string. For example, a vertical tab can
be entered as \x0B.
5. A “\” character followed by any non–numeric character is interpreted as that
character. For example, “\A” is interpreted as an “A”.