Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 45)

Preface
Advanced Programming Software User Manual
3–6
F3 F9
INPUT
FILE
SAVE
CONFIG
Press a function key
SYSTEM CONFIGURATION
F4
BINARY
FILE
BIT ADDRESS DISPLAY
F2 Output File Address Display: Sequential
F3 Input File Address Display: Sequential
F4 Binary File Address Display: Word/Bit
F5 Short Address Display/Entry Disabled
F9 Save Configuration
ESC exits/Alt–U aborts changes
F2
OUTPUT
FILE
F5
SHORT
ADDRESS
2. Select the address display for each file type. When you are finished, press
CONFIG OFFLINE
CONFIG
SAVE
CONFIG
F9
. The message NEW CONFIGURATION SAVED TO FILE is
displayed.
Note To enable short addressing, you must set [F4] Binary File to
Sequential .
3. Press [ESC] and return to the System Configuration display.