Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 359)

Preface
Advanced Programming Software User Manual
19–8
The table below shows an example of an installed, enabled force while in Run or
Test mode.
Force On
Run or Test Mode
Data file
bit = 0
Data file
bit = 1
Initial conditions:
Data file bit = 0
Input circuit is Off.
No forces.
false
] [
I:0
1
true
] [
I:0
1
Force is On, [F2] key. A 1 is placed in
the input force table. Forces are always
enabled. Data file bit remains 1. Input
circuit is still effective.
false
ON
] [
I:0
1
true
ON
] [
I:0
1