Offline config, Cursor to node 4 and press – Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 241
Using WHO
12–7
Setting and Clearing Ownership
The Set and Clear Owner function allows a terminal to “own” one or more
processor files on the network. Ownership means that as long as the owner is active
on the network, other terminals can not access the online functions of the owned
processor files. Note that only a programmer can own another node.
When the owner becomes inactive (exits the network), another terminal can clear
the ownership of the inactive node and gain access to an owned processor file.
However, to do so, the user of that terminal must first select the Clear Owner
function. An owner can clear ownership at any time.
You can set ownership from the Who Active display. The following figure is the
Who Active offline display, showing the active stations of a network having
terminals at nodes 0 and 1.
0
TERM
(31)
12
24
1
APS
(31)
13
25
2
500-20
(31)
14
26
3
500-20
(31)
15
27
4
500-40
(31)
16
28
5
5/02
(5)
17
29
6
18
30
7
19
31
8
20
9
21
10
22
11
23
F2
STATION
DIAGS
Press a key for desired network function
WHO ACTIVE - Active Station Identification
ESC exits
F1
ONLINE
F3
SET
OWNER
F4
CLEAR
OWNER
F7
MAX
ADDRESS
F8
NODE
ADDRESS
F9
NODE
BAUD
1.
Cursor to node 4 and press
CONFIG
OFFLINE
CONFIG
SET
OWNER
F3
.