Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 364)

The Force Function
19–13
The table below shows an example of installed, enabled force while in Run mode.
Force On
Run Mode
Data file
bit = 0
Data file
bit = 1
Initial conditions:
No forces. Output circuit follows output
data file bit state.
false
( )
O:0
0
true
( )
O:0
0
Force is On, [F2] key. A 1 is placed in
the output force table. Output circuit
and LED go on and/or are held on.
Data file bit status is unaffected.
false
ON
( )
O:0
0
true
ON
( )
O:0
0