Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 214)

Preface
Advanced Programming Software User Manual
11–20
F1 Port COM1
Current Device Full-Duplex
F4 Source Address 0
F5 Destination Address 1
F7 Device/Modem/Full-Duplex Configuration
F9 Save to File
F9
Press a function key
SAVE TO
FILE
F1
PORT
F2
SELECT
DEVICE
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F7
DEVICE
CONFIG
F4
SOURCE
ADDRESS
F5
DEST
ADDRESS
1. To configure the DF1 parameters begin by pressing
CONFIG OFFLINE
CONFIG
DEVICE
CONFIG
F7
. The following
display appears:
F9
Press a function key
SAVE
TO FILE
F1 Baud Rate (PC to SLC) 1200
F2 Parity NONE
F3 Error Check CRC
F4 Use Modem (Flow Control) NO
F5 Dial Phone Number N/A
F6 Modem Init String N/A
F7 Phone Number N/A
F8 Auto Disconnect N/A (minutes)
F9 Save to File
F10 Full Duplex Configuration
F1
BAUD
RATE
F2
PARITY
F4
USE
MODEM
ESC exits/Alt-U aborts changes
Device/Modem/Full Duplex Configuration
F7
PHONE
NUMBER
F3
ERROR
CHECK
F10
FULL
DUPLEX