Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 369)

Using Memory Modules (EEPROMs and UVPROMs)
20–5
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 1
PROGRAM DIRECTORY FOR PROCESSOR: TOGGLE
FILE PROTECTED NAME TYPE SIZE (words)
0 system 76
1 reserved 0
2 ladder 6
F1 F2 F6 F7 F3 F4 F8
PROCSSR
FUNCTNS
SAVE
RESTORE
CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
LNK ADR
MONITOR
FILE
F5
WHO
ACTIVE
F9 F10
DATA
MONITOR
MEMORY
MAP
You are online at the program directory for processor file TOGGLE . The
processor should be in the program mode.
2. Press
CONFIG OFFLINE
CONFIG
PROCSSR
FUNCTNS
F1
. The following menu choices appear:
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 1
F2
CHANGE
PASSWORD
F8
MONITOR
FILE
F7
XFER
MEM MOD
F1
CHANGE
MODE
F5
CLEAR
MEMORY
F9 F10
DATA
MONITOR
I/O
CONFIG
3. Press
CONFIG OFFLINE
CONFIG
XFER
MEM MOD
F7
, then
CONFIG OFFLINE
CONFIG
MEM MOD
TO PROC
F2
. Accept the transfer by pressing
CONFIG OFFLINE
CONFIG
YES
F8
.
When the processor has completed the transfer, the following display appears:
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 1
F2
SAVE
RESTORE
F1
PROCSSR
FUNCTNS
F4
CHANGE
LNK ADR
F3
RETURN
TO MENU
F6
CREATE
REPORTS
F8
MONITOR
FILE
F7
FILE
OPTIONS
F5
WHO
ACTIVE
F9 F10
DATA
MONITOR
MEMORY
MAP
At this point the processor file DRILL1 has been transferred to the processor,
overwriting file TOGGLE .