Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 108)

Creating and Editing Ladder Program Files
6–17
2. Press
CONFIG OFFLINE
CONFIG
ADVANCD
EDITING
F8
. The following menu choices appear:
Press a key for desired editing function
(file 2, rung 0)
offline
no forces EDITS: NONE File EXAMPLE
F4
PASTE
F3
COPY
F1
SELECT
F2
CUT
Function Key Description
[F1] Select Marks the first rung in the block of rungs to be cut or copied.
[F2] Cut
Marks the last rung in the block of rungs to be cut and
performs the cut. The cut block of rungs is stored in a
temporary buffer. The cut function is inclusive of the marked
block of rungs.
[F3] Copy
Marks the last rung within the block to be copied and performs
the copy. The copied block of rungs is stored in a temporary
buffer. The copy function is inclusive of the marked block of
rungs.
[F4] Paste Inserts the stored rungs in the buffer above the current rung.
Cut or Copy
To cut or copy a rung(s), begin at the Advanced Editing menu and do the following:
1. Move the cursor to the beginning or end of the block of rungs to be cut or
copied using the arrow keys and press
CONFIG OFFLINE
CONFIG
SELECT
F1
. If you select an Inserted
rung which is connected to a Replaced rung, both rungs are selected.
2. After you have selected the rung(s), press either
CONFIG OFFLINE
CONFIG
CUT
F2
or
CONFIG OFFLINE
CONFIG
COPY
F3
.
The editor places the specified rungs in the temporary buffer. The contents of
the buffer is maintained until you perform another cut or copy function, or until
you exit the software package.