Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 404)

Preface
Advanced Programmming Software User Manual
A–10
Display Message Recommended Action Description
FATAL INTERNAL MANAGE FILES
ERROR
A fatal error occurred in the MF function. Either 1) retry the function; 2) restart the
software; 3) reboot the PC; or 4) run
CHKDSK" from the DOS command
prompt.
FATAL MEMORY ERROR An error occurred while requesting
space from the system.
Either 1) retry the function; 2) restart the
software; 3) reboot the PC; or 4) run
CHKDSK" from the DOS command
prompt.
FILE PROTECTION VIOLATION -
ASSIGNED TO ANOTHER APS
While running under Windows, one APS
attempted to monitor or perform an
archive operation on the same file that a
second APS has already claimed.
In the second APS session, free the
archive file by selecting another archive
file or returning to the main menu.
FILE, RUNG, ILLEGAL INSTRUCTION During a program save or while testing
edits, an unsupported instruction was
detected.
Change or delete the instruction; verify
that the selected processor supports the
instruction; retry the function.
FILE, RUNG, ILLEGAL ADDRESS During a program save or while testing
edits, an unsupported address was
detected.
Verify that the correct processor is
selected to support your desired
addressing structure. Make any
necessary changes; retry the function.
FILE, RUNG, ILLEGAL PROGRAM
STRUCTURE
During a program save or while testing
edits, unsupported instructions or
addresses were detected.
Verify that the correct processor is
selected to support your ladder program;
retry the function.
FILE, RUNG, ILLEGAL ADDRESSING
MODE
During a program save or while testing
edits, an unsupported address was
detected.
Verify that the correct processor is
selected to support your ladder program;
retry the function.
FILE, RUNG, INSTRUCTION FILE
OVERWRITE ERROR
For instruction types that contain file
addresses and a corresponding length,
adequate data table space must exist for
the file address plus a number of
addresses past that address. During a
program save or test edits an instruction
was detected that violates this rule.
Change the file address or length and
retry the function.
FILE, RUNG, INSTRUCTION, I/O
ADDRESS UNDEFINED
During a program save or test edits, an
input or output address has been
detected on a rung but the address is
not configured for the given processor.
Change the address or I/O configuration
and retry the function.
FILE, RUNG, INSTRUCTION, M0/M1
ADDRESS NOT CONFIGURED
During a program save or test edits, an
M0/M1 address has been detected on a
rung but the address is not configured
for the given processor.
Change the address or I/O configuration
and retry the function.