Preface, Offline config, Press – Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 218: The following display appears, Yes with continuous carriers, Yes w/o continuous carrier, No the default is no
Preface
Advanced Programming Software User Manual
11–24
1.
Press
CONFIG
OFFLINE
CONFIG
DEVICE
CONFIG
F7
. The following display appears:
F9
Press a function key
SAVE
TO FILE
F1
Baud Rate (PC to Master)
1200
F2
Parity
NONE
F3
Error Check
CRC
F4
Use Modem (Flow Control)
NO
F5
Dial Phone Number
N/A
F6
Modem Init String
N/A
F7
Phone Number
N/A
F8
Auto Disconnect
N/A (minutes)
F9
Save to File
F10 Half Duplex Slave Configuration
F1
BAUD
RATE
F2
PARITY
F4
USE
MODEM
ESC exits/Alt-U aborts changes
Device/Modem/Half Duplex Slave Configuration
F7
PHONE
NUMBER
F3
ERROR
CHECK
F10
HALF
DUPLEX
Select the different options by pressing the corresponding function key. Notice
that [F4] Use Modem has additional parameters associated with it. They are:
•
Yes With Continuous Carriers
•
Yes W/O Continuous Carrier
•
No
The default is No.