Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 42
Configuring Your System
3–3
Intensify
•
Cursor is shown as a reversed screen area (located on an instruction, rung, or
power rail).
•
True instructions are shown intensified (heavier line weight).
•
A true instruction at the cursor location is shown diminished (true) in a reversed
screen area (cursor).
•
Enabled forces are shown as an intensified “On” or “Off.”
Note
If you are using a T47 terminal or another terminal having an LCD display, the
preferred option is REVERSE. With the INTENSIFY option, true instructions and
enabled forces are not easy to distinguish because they are diminished rather than
intensified.
Color Selection
Function key [F3], Color Select toggles the Color Selection between
MONOCHROME and COLOR.
Monochrome (Default Option)
The display varies according to the type of monochrome or LCD monitor used. If
you are using a T45 or T47 terminal or another terminal having an LCD display, you
should use the MONOCHROME option. With the color option certain parts of the
display are not easy to distinguish.