Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 280)

Restoring and Saving Processor Files
14–7
Saving a File
Use the Save function when:
•
An online data change or a password change has been made to the file and you
want the change to be a permanent part of the file.
•
The file in the processor is from some other source (a memory module, an HHT,
or another APS terminal) and you want to place a copy of the file on disk.
The Save function is accessed from the same menu level used to restore a processor
file.
F2
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 1
SAVE
RESTORE
F4
CHANGE
LNK ADR
F1
PROCSSR
FUNCTNS
F3
RETURN
TO MENU
F6
CREATE
REPORTS
F7
FILE
OPTIONS
F8
MONITOR
FILE
F9
DATA
MONITOR
F10
MEMORY
MAP
F5
WHO
ACTIVE
1. Assume that an online data change or password change has been made to a file
already on disk, and you want to save the change. Press
CONFIG OFFLINE
CONFIG
SAVE
RESTORE
F2
. The
following menu functions appear:
F2
Press a function key
REM PROG L532 Series C Rev.2 PROC Addr 1
SAVE
PROGRAM
F4
RESTORE
PROGRAM
2. Press
CONFIG OFFLINE
CONFIG
SAVE
PROGRAM
F2
. The following display appears: