Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 29)

Preface
Advanced Programming Software User Manual
2–2
Using Online Help
The Advanced Programming Software, version 4.0 and above supports online help.
You can access the help text by pressing
[ALT–H] .
If you press [ALT–H] , and help is not currently available, the message: HELP
CURRENTLY UNAVAILABLE is displayed. This message may appear when a
process is active, such as uploading or downloading processor images or when
creating or printing reports.
The help text is displayed in the following priorities:
•
If currently in the ladder editor or monitor program function, the help text
displayed is for the currently cursored (or edited) instruction.
•
If currently in the system status file data table monitor function, the help text
displayed is for the currently cursored address.
•
If none of the above conditions exist, then the beginning of the help text file is
displayed.
Use the [Pg Up] , [Pg Dn] , [arrow–up] , [arrow–down], [Home] , and
[End] keys to scroll through the help text.
Once the help text is displayed, you can search the help file for specific topics by
entering text at the command line. For example, you may want to enter an
instruction mnemonic or a system status file address. See the example that follows.