Yaskawa 120 Series I/O Modules - Manual (Page 136)

3 Digital I/O Specifications
3.5.1 MEMOSOFT Versions Supporting 64-point I/O Modules
3-106
3.5 Operations Using MEMOSOFT
3.5.1 MEMOSOFT Versions Supporting 64-point I/O Modules - - - - - - - - 3-106
3.5.2 Digital Input Module I/O Allocation Screen - - - - - - - - - - - - - - - - - - 3-107
3.5.3 Digital Output Module I/O Allocation Screen - - - - - - - - - - - - - - - - 3-108
3.5.4 I/O Allocations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-109
3.5.1 MEMOSOFT Versions Supporting 64-point I/O Modules
The following MEMOSOFT versions are required to use 64-point I/O Modules in
MEMOCON GL120 or GL130.
The following CPU Module, Remote I/O Receiver Module, and MEMOSOFT versions
are necessary to use 64-point I/O Modules.
Using an inappropriate version may cause failure and malfunction.
* The nameplate is on the right side of the Module.
This section describes the I/O allocations (maps) using the MEMOSOFT.
Table 3.10 Versions Supporting 64-point I/O Modules
Name Model
Name
Model No. Version Number Location of
Version Number
CPU Module
(8 kW) CPU10 DDSCR-
120CPU14200 †† A01 and later Module nameplate
CPU Module
(16 kW) CPU20 DDSCR-
120CPU34100 †† B05 and later Module nameplate
CPU Module
(16 kW) CPU21 DDSCR-
120CPU34110 †† A01 and later Module nameplate
CPU Module
(32 kW) CPU30 DDSCR-
120CPU54100 †† B05 and later Module nameplate
CPU Module
(40 kW) CPU35 DDSCR-
120CPU154110 †† A01 and later Module nameplate
Remote I/O
Receiver
Module RIOR-
COAX JAMSC-
120CRR13100 †† A10 and later Module nameplate
MEMOSOFT FMSGL-AT3
(for English
DOS) 1.21† and later In the middle at the
bottom of the
MEMOSOFT star-
tup screen.
FMSGL-PP3E
(for P120
English version)
CAUTION