Yaskawa 120 Series I/O Modules - Manual (Page 90)

3 Digital I/O Specifications
3.3.1 I/O Module Cable Types
3-60
3.3 I/O Module Cables
3.3.1 I/O Module Cable Types - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-60
3.3.2 W0300 Cables (Model No. JZMSZ-120W0300-††) - - - - - - - - - - - - 3-62
3.3.3 W0302 Cables (Model No. JZMSZ-120W0302-††) - - - - - - - - - - - - 3-65
3.3.4 W0301 Cables (Model No. JZMSZ-120W0301-††) - - - - - - - - - - - - 3-68
3.3.5 32-point I/O Connector Terminal Block - - - - - - - - - - - - - - - - - - - - - 3-71
3.3.6 W5410 Cables (Model No. JEPMC-W5410-††) - - - - - - - - - - - - - - 3-74
3.3.1 I/O Module Cable Types
1) 32-point I/O Module Cables
a) Use
The 32-point I/O Module Cables are used to connect external devices to the Mod-
ules listed below.
• 12/24-VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
• 12/24-VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
• One-axis Motion Module (Model No. JAMSC-120MMB10100)
• Two-axis Motion Module (Model No. JAMSC-120MMB20200)
b) Types
There are nine types of 32-point I/O Module Cables, as shown in the following table.
The difference between the W0300 Cable and the W0302 Cable is the size of the
end which connects to the Module Connector.
This section describes the use and types together with the specifications of the I/O
Module Cables.
Table 3.1 32-point I/O Module Cables
Product Name Model
Name
Model
Number
Features Cable
Length
32-point
I/O
Module
Cables W0300 Cable W0300-01 JZMSZ-
120W0300-01 1) Used to connect external devices to 32-point Input
Modules, 32-point Output Modules, and Motion
Control Modules (MC10 and MC15).
2) Cables provide connector on Module end and with
loose wires (AWG28: 0.08 mm 2 ) on external
device end.
1.0 m
W0300-03 JZMSZ-
120W0300-03 3.0 m
W0300-05 JZMSZ-
120W0300-05 5.0 m
W0302 Cable W0302-01 JZMSZ-
120W0302-01 1) Used to connect external devices to 32-point Input
Modules, 32-point Output Modules, and Motion
Control Modules (MC10 and MC15).
2) Cables provide connector on Module end and with
loose wires (AWG24: 0.2 mm
2
) on external device
end.
1.0 m
W0302-03 JZMSZ-
120W0302-03 3.0 m
W0302-05 JZMSZ-
120W0302-05 5.0 m
W0301 Cable W0301-01 JZMSZ-
120W0301-01 1) Used to connect external devices to 32-point Input
Modules, 32-point Output Modules, and Motion
Control Modules (MC10 and MC15).
2) Cables provide connector on both Module and
external device ends
3) Used in combination with a connector terminal
block for 32-point I/O Modules.
1.0 m
W0301-03 JZMSZ-
120W0301-03 3.0 m
W0301-05 JZMSZ-
120W0301-05 5.0 m
INFO