Yaskawa 120 Series I/O Modules - Manual (Page 221)

5.4 Operations Using MEMOSOFT
5-23
5
(2) When the reference number of the first output register is input, the cursor
moves to the field for the reference number of the last output register and the
reference number will be displayed automatically, indicating the reference
number that can be input. Press the Enter Key to accept the value or change it
to the desired value if necessary.
Fig. 5.13 Reference Number of First Output Register
(3) The last reference number of the output register will be displayed.
Fig. 5.14 Reference Number of Last Output Register
(4) This completes the setting of I/O references.
I/O references for the Register Input Module can be set in the same way as the
Register Output Module.
Input 400020.
INFO