Yaskawa 120 Series I/O Modules - Manual (Page 193)

4 Analog I/O Specifications
4.4.3 I/O Allocations
4-46
3) Setting I/O References
A screen to allocate I/O (I/O Traffic Cop Screen) will be displayed.
(1) Input the reference number of the first input register:
Move the cursor to the field for the reference number of the first input register
and input the reference number. Press the Enter Key.
Fig. 4.10 I/O Traffic Cop Screen
(2) When the reference number of the first input register is input, the cursor will
move to the field for the reference number of the last input register and the ref-
erence number will be displayed automatically, indicating the reference number
that can be input. Press the Enter Key to accept the value or change it to the
desired value if necessary.
Fig. 4.11 Reference Number of First Input Register
(3) The reference number of the last input register will be displayed.
Fig. 4.12 Reference Number of Last Input Register
(4) This completes the setting of I/O references.
Input 300011
Input 300012
if you want to
change the
number