Yaskawa 120 Series I/O Modules User Manual
Page 197
4 Analog I/O Specifications
4.4.3 I/O Allocations
4-50
The MEMOSOFT is set by default to OPEN OUTPUT.
Fig. 4.20 Timeout Output Status Selection
Note: The timeout output setting is only for Analog Output Modules,
but not for Analog Input Modules.
8) Setting the Timeout Output Data (Only for Analog Output Modules)
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to the input field for USER SET VAUE and input a value.
Then, press the Enter Key.
Fig. 4.21 Parameter Setting Screen: Timeout Output Data
The MEMOSOFT is set by default to 0.
Fig. 4.22 Timeout Output Data Setting
Note: The timeout output data setting is only for Analog Output Mod-
ules, but not for Analog Input Modules.
Input 100
for example