Yaskawa 120 Series I/O Modules - Manual (Page 18)

1.2 Precautions
1-13
1
• The following CPU Modules, Remote I/O Receiver Modules, and MEMOSOFT ver-
sions are required to use DC 64-point I/O Modules.
Using a version that is not recommended may result in failure or malfunction.
* The nameplate is on the right side of the Module.
Name Model
Name
Model No. Version Number Location of
Version Number
CPU Module
(8 kW) CPU10 DDSCR-
120CPU14200 †† A01 and later Module nameplate
CPU Module
(16 kW) CPU20 DDSCR-
120CPU34100 †† B05 and later Module nameplate
CPU Module
(16 kW) CPU21 DDSCR-
120CPU34110 †† A01 and later Module nameplate
CPU Module
(32 kW) CPU30 DDSCR-
120CPU54100 †† B05 and later Module nameplate
CPU Module
(40 kW) CPU35 DDSCR-
120CPU154110 †† A01 and later Module nameplate
Remote I/O
Receiver
Module RIOR-
COAX JAMSC-
120CRR13100 †† A10 and later Module nameplate
MEMOSOFT FMSGL-AT3
(for English
DOS) 1.21† and later In the middle at the
bottom of the
MEMOSOFT
startup screen.
FMSGL-PP3E
(for P120
English version)
CAUTION