Yaskawa 120 Series I/O Modules - Manual (Page 36)

3 Digital I/O Specifications
3.1.2 200-VAC 16-point Input Module
3-6
3.1.2 200-VAC 16-point Input Module
1) Performance Specifications
Item Specifications
Name 200-VAC 16-point Input Module
Model Name AC200IN-16P
Model No. JAMSC-120DAI74300
Rated Voltage 200 VAC
Maximum Allowable Voltage 264 VAC
Rated Frequency 50/60 Hz
Allowable Frequency Range 47 to 63 Hz
Inrush Current 320 mA
Rated Current 7 mA (at 200 VAC, 50 Hz)
Input Impedance 28.6 k Ω (at 200 VAC, 50 Hz)
23.1 k Ω (at 200 VAC, 50 Hz)
Standard Operating Ranges ON voltage range: 159 to 264 VAC
OFF voltage range: 40 VAC max.
Input Type AC type 2 (according to JIS B3502)
Input Delay Times OFF to ON: 20ms max.
ON to OFF: 35ms max.
Number of commons 2
Number of Inputs per Common 8 points/common
Input Power Supply per Common Connect power supplies of the same phases to the Common 1 and
Common 2.
External Connections Removable terminal block with M3 screw terminals
Number of Inputs 16
Input Signal Indication Indicator for each point; lit when the input is ON.
Status saved in internal logic.
Status Indication ACTIVE: Lights during input processing
Insulation Method Photocoupler
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between input terminals and
internal circuits and between all input commons.
Insulation Resistance 100 M Ω min. at room temperature and humidity between input termi-
nals and ground
(measured with a 500-VDC test voltage megohmmeter).
External Power Supply 200 VAC supplied to signals
Derating Conditions None
Internal Current Consumption 90 mA max. at 5 VDC (with all points ON)
Maximum Heating Value 3.5 W
Hot Swapping
(Removal/insertion under power) Permitted
Approx. Mass 250 g
External Dimensions 40.3 ×130×103.9 mm (W×H×D)