5) setting the bit order – Yaskawa 120 Series I/O Modules User Manual
Page 144
Advertising
3 Digital I/O Specifications
3.5.4 I/O Allocations
3-114
5) Setting the Bit Order
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to BIT ORDER and press the Enter Key to access the bit
order setting.
(2) A screen will appear so that the bit order setting can be selected.
Move the cursor to either LSB or MSB and press the Enter Key to select the
desired bit order.
The MEMOSOFT is set by default as follows:
• Input relays and output coils: MSB
• Input registers and output registers: LSB
Fig. 3.28 Mode Selection
Fig. 3.29 Parameter Setting Screen: Bit Order
Fig. 3.30 Bit Order Selection
Advertising