6) mode setting – Yaskawa 120 Series I/O Modules User Manual
Page 224
Advertising
5 Register I/O Specifications
5.4.3 I/O Allocations
5-26
6) Mode Setting
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to Mode and press the Enter Key to access the mode setting.
Fig. 5.19 Parameter Setting Screen: Mode
(2) A screen appears so that the mode setting can be selected.
Move the cursor to either 8CH or 16CH and press the Enter Key to select the
desired mode.
The MEMOSOFT is set by default to 16CH.
Fig. 5.20 Mode Selection
Advertising