Yaskawa 120 Series I/O Modules - Manual (Page 20)

1.3 Using This Manual
1-15
1
1.3 Using This Manual
This manual is written for those who already have a basic knowledge of MEMOCON
PLCs. We recommended reading the MEMOCON GL120, GL130 Hardware User’s
Manual (manual No. SIEZ-C825-20.1) before attempting to read this manual.
• Meaning of Basic Terms
In this manual, the following terms indicate the meanings as described below,
unless otherwise specified.
• Description of Technical Terms
The bold technical terms in this manual are briefly explained in the Glossary
provided at the bottom of the page. An example is shown below.
Terms Meaning Remarks
PLC Programmable (Logic) Controller Does not mean “personal
computer.”
PP Programming Panel −
GL120, GL130 MEMOCON GL120 and MEMOCON GL130
Programmable Controllers −
AC I/O
Module AC input
Module 100-VAC 16-point Input Module
200-VAC 16-point Input Module −
AC output
Module 100/200-VAC 8-point Output Module
100/200-VAC 16-point Output Module
Relay Contact 16-point Output Module*
1
* 1 When the AC load is
applied.
DC I/O
Module DC input
Module 12/24-VDC 16-point Input Module
12/24-VDC 32-point Input Module
12/24-VDC 64-point Input Module −
DC output
Module 12/24-VDC 8-point Output Module
12/24-VDC 16-point Output Module
12/24-VDC 32-point Output Module
12/24-VDC 64-point Output Module
Relay contact 16-point Output Module*
2
* 2 When the DC load is
applied.
Analog
I/O
Module Analog
input Module Analog Input Module ( ±10V, 4CH)
Analog Input Module (0 to 10V, 4CH)
Analog Input Module (4 to 20mA, 4CH)
−
Analog
output Module Analog Output Module ( ±10V, 2CH)
Analog Output Module (0 to 10V, 2CH)
Analog Output Module (0 to 5V, 2CH)
Analog Output Module (4 to 20mA, 2CH)
−
Register I/O Module Register Input Module −
Register Output Module
Glossary
The following types of terms are described.
• Specific sequence control terms required for explanation of functions.
• Terms that are specific to programmable controllers and electronic devices.
TERMS