Yaskawa 120 Series I/O Modules - Manual (Page 145)

3.5 Operations Using MEMOSOFT
3-115
3
6) Setting the Service Scan
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to SERVICE SCAN and press the Enter Key to access the
service scan setting.
(2) A screen will appear so that the service scan setting can be selected.
Move the cursor to either NORMAL or HIGH and press the Enter Key to select
the desired scan service.
The MEMOSOFT is set by default to NORMAL.
Fig. 3.31 Parameter Setting Screen: Service scan
Fig. 3.32 Service Scan Selection