Yaskawa 120 Series I/O Modules - Manual (Page 98)

3 Digital I/O Specifications
3.3.4 W0301 Cables (Model No. JZMSZ-120W0301-††)
3-68
3.3.4 W0301 Cables (Model No. JZMSZ-120W0301-††)
1) Use
(1) This Cable is used to connect external devices to the Modules listed below.
(a) 12/24VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
(b) 12/24VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
(2) The end of the Cable on the external device is fitted with a connector.
Use the Cable in combination with a 32-point I/O connector Terminal Block.
See 3.3.5 32-point I/O Connector Terminal Block for information about the 32-
point I/O connector Terminal Block.
2) Specifications
The following table shows specifications of W0301 Cables.
3) Appearance
The following illustration shows the appearance of a W0301 Cable.
Table 3.5 Specifications of W0301 Cable
Item Specifications
Model Name W0301-01 W0301-03 W0301-05
Model No. JZMSZ-120W0301-01 JZMSZ-120W0301-03 JZMSZ-120W0301-05
Length L 1.0 m 3.0 m 5.0 m
Cable
Specifications
Shielded cable, 40 cores, equivalent to UL20276, AWG28 (0.08 mm 2 )
Cable
Termination Module
side Connector: Connector 10140–6000EL (3M)
Shell 10640-5500-008 (3M)
Screw 3342-26 (3M)
Latch 10600-L0F0-8 (3M)
External
device
side Connector fitted: FCN-361J040-AU + FCN-360C040-E
(made by Fujitsu Ltd.).
Insulation
Resistance 100 M Ω min. at room temperature and humidity between core wires
(connected together) and shielding wire, and between core wires
(measured with a 500-VDC test voltage megohmmeter).
Connector 1 (Module side)
Model name
Connector 2 (external device side)
Shielded cable