Yaskawa 120 Series I/O Modules - Manual (Page 219)

5.4 Operations Using MEMOSOFT
5-21
5
(2) Press the F2 (Config) Key to access the PLC System Configuration Screen.
Fig. 5.8 PLC System Configuration Screen
(3) Select I/O Map from the Map Menu using the Cursor Keys and press the Enter
Key.
Fig. 5.9 I/O Map Selection
(4) The I/O Map Screen is displayed. Move the cursor to the slot to which the allo-
cations are to be made.
Fig. 5.10 I/O Map
If the Register I/O Module is already mounted, the Module name will be dis-
played on the right.
fx2
fx4