2) setting the module type – Yaskawa 120 Series I/O Modules User Manual
Page 140
Advertising
3 Digital I/O Specifications
3.5.4 I/O Allocations
3-110
2) Setting the Module Type
Set the Module Type in the following procedure.
(1) Start the MEMOSOFT and select Online from the Mode Menu.
I/O allocations cannot be performed while the CPU Module is in RUN status.
If necessary, stop the CPU Module. Refer to 6.1 PLC Operations in the
MEMOSOFT User’s Manual (Manual No. SIEZ-C825-60.10) for the procedure
to stop the CPU Module.
(2) Press the F2 (Config) Key to access the PLC System Configuration Screen.
(3) Select I/O Map from the Map Menu using the Cursor Keys and press the Enter
Key.
Fig. 3.19 Mode Selection: Online
fx2
Fig. 3.20 PLC System Configuration Screen
fx4
Fig. 3.21 Selecting the I/O Map
Advertising