Yaskawa 120 Series I/O Modules - Manual (Page 58)

3 Digital I/O Specifications
3.2.2 100/200-VAC 16-point Output Module
3-28
3.2.2 100/200-VAC 16-point Output Module
1) Performance Specifications
Item Specifications
Name 100/200-VAC 16-point Output Module
Model Name ACOUT-16P
Model No. JAMSC-120DAO84300
Rated Voltage 100/200 VAC
Allowable Voltage Range 80 to 264 VAC
Rated Frequency 50/60 Hz
Allowable Frequency Range 47 to 63 Hz
Maximum Load Current 0.6 Arms/point, 2.4 A/common
Output Voltage Drop 1.0 Vrms
Output Delay Times OFF to ON: 5 ms max.
ON to OFF: 1/2 cycle + 5 ms max.
OFF Leakage Current 3 mA max. at 240 VAC, 50 Hz
Minimum Load Current 7 mArms
Output Type Triac outputs
Number of Commons 2
Number of Outputs per Common 8 points/common
Output Power Supply per Common Connect power supplies of the same phase to the Common
1 and Common 2.
External Connections Removable terminal block with M3 screw terminals
Output Protection Type Unprotected outputs (according to JIS B3502)
Built-in Fuse Two, 5-A fuses (one per common)
(Burnout time: 2 min max. at 200 % of rated current)
Surge Suppressor Varistor
Other Output Protection None
Number of Outputs 16
Output Signal Indication Indicator for each point; lit when the output the is ON.
Status saved in internal logic.
Status Indication ACTIVE: Lights during output processing
F: Lights when fuse is burnt out or output power supply is not
connected
Insulation Method Phototriac
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between output
terminals and internal circuits and between all output com-
mons
Insulation Resistance 100 M Ω min. (room temperature and humidity) between out-
put terminals and ground
(measured with a 500-VDC test voltage megohmmeter).
External Power Supply 100/200 VAC supplied to drive loads
Derating Conditions None
Internal Current Consumption 300 mA max. at 5 VDC (with all points ON)
Maximum Heating Value 5.5 W
Hot Swapping
(Removal/insertion under power) Permitted
Approximate Mass 300 g
External Dimensions 40.3 ×130×103.9 mm (W×H×D)