Yaskawa 120 Series I/O Modules - Manual (Page 42)

3 Digital I/O Specifications
3.1.3 12/24-VDC 16-point Input Module
3-12
3) The following diagram shows an example of terminal connections.
Note: (1) Crimp Terminals
Use M3 terminal for crimping to the terminal block.
(2) Recommended Wires
Use wires of 0.8 mm 2 (AWG18) to 0.2 mm 2 (AWG24) to
connect to the terminal block.
(3) Terminal 10 and terminal 20 are not connected.
(4) The polarity of the external power supply for signals can be
either positive or negative.
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
Common 1
Not connected
Input 9
Input 10
Input 11
Input 12
Input 13
Input 14
Input 15
Input 16
Common 2
Not connected
12/24 VDC
12/24 VDC
Terminals
EXAMPLE