Yaskawa 120 Series I/O Modules - Manual (Page 79)

3.2 Digital Output Module Specifications
3-49
3
3.2.7 12/24-VDC 64-point Output Module
1) Performance Specifications
Item Specifications
Name 12/24-VDC 64-point Output Module (Sinking)
Model Name DC24OUT-64PSN
Model No. JAMSC-120DDO36410
Rated Voltage 12/24 VDC
Allowable Voltage Range 10.2 to 30.0 VDC
Output Form Sinking
Maximum Load Current 0.1 A/points
Output Voltage Drop 1.5 V max (0.1 A)
Output Delay Times OFF to ON: 1 ms max.
ON to OFF: 1 ms max.
OFF Leakage Current 1 mA max. at 24 VDC
Output Type Transistor outputs
Number of Commons 4
Number of Outputs per Common 16 points/common
External Connections 40-pin connector: 2 pieces
Connector: FCN-365P040 (manufactured by Fujitsu)
Output Protection Type Unprotected outputs (according to JIS B3502)
Built-in Fuse Four, 2-A fuses (one per common)
(Burnout time: 1 s max. at 200 % of rated current)
Surge Suppressor None
Other Output Protection None
Number of Outputs 64
Output Signal Indication Indicator for each point; lit when output is ON.
Status saved in internal logic.
32 indicators controlled by toggle switches
Status Indication ACTIVE: Lights during output processing
F: Lights when fuse is burnt out or output power supply is not
connected
Insulation Method Photocoupler
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between output
terminals and internal circuits and between all output com-
mons
Insulation Resistance 100 M Ω min. at room temperature and humidity between
output terminals and ground (measured with a 500-VDC test
voltage megohmmeter).
External Power Supply 12/24 VDC supplied to drive loads
Derating Conditions None
Internal Current Consumption 650 mA max. at 5 VDC (with all points ON)
Maximum Heating Value 13 W
Hot Swapping
(Removal/insertion under power) Permitted
Approximate Mass 300 g
External Dimensions 40.3 ×130×103.9 mm (W×H×D)