Yaskawa 120 Series I/O Modules - Manual (Page 222)

5 Register I/O Specifications
5.4.3 I/O Allocations
5-24
4) Service Scan Setting
Use the following procedure to set the Register Input/Output Module parameters.
Press the F4 (Zoom) Key to access the Parameter Setting Screen (I/O Map Module
Editor).
(1) Move the cursor to Service scan and press the Enter Key to access the ser-
vice scan setting.
Fig. 5.15 Parameter Setting Screen: Service scan
(2) A screen appears so that the service scan setting can be selected.
Move the cursor to either Normal or High Speed and press the Enter Key to
select the desired scan service.
The MEMOSOFT is set by default to Normal.
Fig. 5.16 Service Scan Selection