Yaskawa 120 Series I/O Modules - Manual (Page 249)

6 Installation and Wiring
6.2.3 Wiring DC I/O Modules
6-22
As shown in the following figure, the external device side of the W0302 cable is
divided into individual wires. The cable size is 0.2mm
2
.
f) When a W0301 32-point I/O Module cable is used, select the appropriate cable from
the three cables shown in the following table:
As shown in the following figure, the external device side of the W0301 cable is
equipped with a connector.
Connector (Module side)
Model name
Shielded cable
Pin number is attached to each wire.
Loose wires
(external device side)
40-core
loose wires
Table 6.10 W0301 32-point I/O Module Cables
Item Specifications
Name W0301 Cable
Model Name W0301-01 W0301-03 W0301-05
Model No. JZMSZ-120W0301-01 JZMSZ-120W0301-03 JZMSZ-120W0301-05
Length (L) 1.0 m 3.0 m 5.0 m
Cable Specifications Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.08mm
2 )
Terminals Module Side Connector: 10140-6000EL+10640-5500-008 (manufactured by SUMIT-
OMO 3M Ltd.)
External
Device Side Connector: FCN-361J040-AU+FCN-360C040-E (manufactured by Fujitsu
Ltd.)
Connector 1 (Module side)
Connector 2
(external device side) Model name
Shielded cable