Yaskawa Sigma II Series DC Power Input SGMAJ - Manual (Page 105)

5 Specifications and Dimensional Drawings of Cables and Peripheral Devices
5.2.3 SGMAJ Servomotor Connectors for Standard Environments
5-8
(4) Connector Kit for SERVOPACK Power Supply Input + Motor Cable Connection
(a) Type
(b) Dimensional Drawings and Connector Pin Arrangement
• CN7 (Control power input connector)
Connector with cage: 721-102/026-000 (WAGO Company of Japan Ltd.)
• CN8 (Motor connection connector)
Connector with cage: 721-105/026-000 (WAGO Company of Japan Ltd.)
Type Attached Connector Connector Type Manufacturer
JZSP-CJG9-3
CN7 Control power input connector 721-102/026-000
WAGO Company of
Japan Ltd.
CN8 Motor connection connector 721-105/026-000
CN9 Main circuit power input connector 721-203/026-000
Pin No. Signal Terminal Name Item
1 C1 Control power input (+) 24/48 VDC terminal
2 C2 Control power input ( −) DC ground terminal
Pin No. Signal Terminal Name Item
1 FG/G Ground terminal Motor ground terminal
2 − Empty Do not connect.
3 U Motor phase U connection terminal Connect the motor U phase.
4 V Motor phase V connection terminal Connect the motor V phase.
5 W Motor phase W connection terminal Connect the motor W phase.
1.5
(0.06)
5
(0.20)
5
(0.20)
11.5 (0.45)
Units: mm (in)
1-pin
Latch Coding finger
8.5
(0.33)
18 (0.71)
26.5 (1.04)
14.5 (0.57)
1.5
(0.06)
5
(0.20)
Units: mm (in) 1-pin
Latch Coding finger
8.5
(0.33)
18 (0.71)
26.5 (1.04) 26.5 (1.04)
14.5 (0.57)