Yaskawa Sigma II Series DC Power Input SGMAJ - Manual (Page 277)

9 Adjustments
9-26
9.5 Analog Monitor
Signals for analog voltage references can be monitored.
To monitor analog signals, connect the analog monitor cable (JZSP-CA01 or DE9404559) to the connector CN5.
The analog monitor signals can be selected by setting parameters Pn003.0 and Pn003.1.
Pin Number Line Color Signal Name Monitoring Item with Factory Setting
1 Red Analog monitor 2
Motor speed: 1 V/1000 min
-1
2 White Analog monitor 1 Torque reference: 1 V/100% rated torque
3, 4 Black (2 lines) GND (0 V) −
Cable Type:
JZSP-CA01
or DE9404559
Black
Black
Red
White
CN5