Yaskawa Sigma II Series DC Power Input SGMAJ - Manual (Page 115)

5 Specifications and Dimensional Drawings of Cables and Peripheral Devices
5.6.3 Cables for Analog Monitor
5-18
(3) Other Types of the Applicable Connection Cables: JZSP-CMS00-†
The following cables are applicable for longer distance connection.
5.6.3 Cables for Analog Monitor
(1) Cable Type: JZSP-CA01 (DE9404559)
Connect the specified cables to CN5 connector for monitoring the analog monitor signals. For details, refer to
9.5 Analog Monitor.
Specify the cable type either JZSP-CA01 or DE9404559 when ordering the cable for analog monitor.
(2) Dimensional Drawing
* Manufactured by Hirose Electric Corporation.
(3) Specifications
Note: The above monitoring items are the factory settings. The monitoring items can be changed by setting the
parameter Pn003. Refer to 9.5 Analog Monitor.
Cable Type
Cable Length
(L)
JZSP-CMS00-1 1 m (3.28 ft)
JZSP-CMS00-2 1.5 m (4.92 ft)
JZSP-CMS00-3 2 m (6.56 ft)
L
2
10
1
9
8
11
1
7
Digital Operator end
Units: mm (in)
SERVOPACK end
17.3 (0.68)
29.5 (1.16)
20.2 (0.80)
30 (1.18) 39 (1.54)
Cable for Analog Monitor
CN5
INFO
3 4
1 2
Socket: DF11-4DS-2C∗
Connector: DF11-2428SCF∗
1000 mm
-0
+20 (39.37 in)
-0
+0.79
White
Red
Black
Black
Viewed from the cable
Pin No. Cable Color Signal Monitoring Item
1 Red Analog Monitor 2 Motor speed: 1V/1000 min -1
2 White Analog Monitor 1
Torque reference: 1V/100% rated
torque
3 and 4 Black (2 cables) GND (0 V) −