Migration and installation workflow, Migration and installation workflow summary – Microsoft Surface Hub 2 SmCamera User Manual
Page 156
Two USB drives that have 16 GB of storage, FAT32 format
The drivers and firmware for Windows 10 Pro and Enterprise in a Surface Hub 2
Microsoft Windows Installer (MSI) file
Internet connection
Imaging solution (optional)
Step Action
Summary
1
Verify the UEFI
version on the
Surface Hub 2S
.
The UEFI version must be version
694.2938.768.0
or later.
2
Download Surface
UEFI Configurator
and the Surface
Hub 2 drivers and
firmware.
page, select
Download
. Then select
and download the
Surface UEFI Configurator MSI file
, and install it
Save this package for use in step 5.
3
Prepare the certificate that's required to run Surface UEFI
Configurator, or use your current certificate.
4
Start Surface UEFI Configurator to create a SEMM package on a USB
drive. This package will contain the configuration files you need to
apply on Surface Hub 2S. Copy these SEMM package files to a
folder on your PC.
5
Load a USB flash
drive with Windows
10 image, the
SEMM package,
and drivers and
firmware.
Create a USB drive that contains a Windows 10 image. In this
example, the drive is named
BOOTME
. Add the drivers and firmware
for Windows 10 Pro and Enterprise OS on Surface Hub 2 (from step
2) and the SEMM package files (from step 4) to the
BOOTME
drive.
6
Update the UEFI on
the Surface Hub 2S
to enable OS
migration.
Use the
BOOTME
drive to boot the Surface Hub 2S to the UEFI
menu and install the SEMM package.
7
Install Windows 10
Pro or Enterprise.
Use the
BOOTME
drive to install Windows 10 Pro or Enterprise
version
20H2
or later.
8
Install drivers and
firmware for
Windows 10 Pro
and Enterprise.
To ensure that your device has all the latest updates and drivers,
Migration and installation workflow summary