Place surface hub 85" on wall mount or cart – Microsoft Surface Hub 2 SmCamera User Manual
Page 432
Advertising
2. Unlock wheel brakes (x4).
3. Move product to location of wall or cart mount.
1. Place Hub 2S in front of wall mount or cart.
2. Lock wheel brakes (x4).
3. Slide inner packaging off pallet.
4. Cut the 3 plastic straps.
5. Remove lid.
6. Remove white foam pieces.
7. Remove Welcome Kit.
8. Remove end piece by lifting vertically.
9. Remove wood end pieces by the four hand knobs screws on the wood base.
7. Place Surface Hub 85" on Wall Mount or Cart
Advertising