Microsoft Surface Hub 2 SmCamera - Manual (Page 80)

1. Toggle Yes or No for proxy settings. By default, Surface Hub automatically detects
proxy settings. However, if your infrastructure previously required using a proxy
server and has changed to not require a proxy server, you can use a provisioning
package to revert your Surface Hub devices to the default settings by selecting
Yes
and Automatically detect settings .
2. If you toggle Yes , you can select to automatically detect proxy settings or manually
configure the settings by entering one of the following:
A URL to a setup script.
A static proxy server address and port information.
3. If you intend to use a setup script or proxy server, turn off Automatically detect
settings . You can use a setup script or a proxy server, not both.
4. Enter exceptions (addresses that Surface Hub should connect to directly without
using the proxy server). Example: *.office365.com
5. Identify whether to use the proxy server for local addresses.
Set up device admins