Microsoft Surface Hub 2 SmCamera - Manual (Page 311)

Secure and manage Surface Hub 2S
with SEMM and UEFI
Article • 01/03/2023
New in Surface Hub 2S, you can use SEMM to manage the UEFI setting of the device.
Use the Microsoft Surface UEFI Configurator to control the following components:
Wired LAN
Cameras
Bluetooth
Wi-Fi
Occupancy sensor
Use the Microsoft Surface UEFI Configurator to turn on or off the following UEFI
settings:
Boot
IPv6 for PXE Boot
Alternate Boot
Boot Order Lock
USB Boot
UEFI Front Page
Devices
Boot
Date/Time
Unlike other Surface devices, you cannot use an MSI file or a Win PE image to apply
these settings on Surface Hub 2S. Instead, you need to create a USB image to load into
the device. To create a Surface Hub 2S UEFI configuration image, download and install
the latest version of the Microsoft Surface UEFI Configurator from the
Surface Tools for
IT page in the Microsoft Download Center. For more information about using UEFI
and SEMM, see Microsoft Surface Enterprise Management Mode .
1. Start the UEFI Configurator and on the first screen, choose Configuration Package .
Create UEFI configuration image
To configure UEFI on Surface Hub 2S