Microsoft Surface Hub 2 SmCamera - Manual (Page 437)

hazards prior to and to avoid these hazards during installation. Assess the
mounting environment and always make sure there are no unseen hazards in the
wall or other mounting surface prior to drilling and/or cutting.
２ Warning
Tip hazard
To avoid risk of personal injury, death, or damage to a cart/stand-mounted device
when it is moved:
Only use a cart/stand that is compatible with this device.
Follow all instructions provided by the cart/stand manufacturer for moving or
relocating a stand-mounted device.
Do not hang or place heavy objects from the device or on the cart/stand.
Disconnect the power cord and other cables as needed prior to moving the
cart/stand-mounted device. Use caution and move slowly when moving
cart/stand-mounted device. Follow the cart/stand manufacturer’s instructions
for moving or relocating the stand.
Use caution when transporting a cart/stand-mounted device up or down
ramps. Never leave a cart/stand-mounted device unattended on or near a
ramp.
Only adults should move the cart/stand-mounted device.
Ｕ Caution
Touch-screen glass
The touch screen on the device, like most touch screens, is made of glass. The glass
can break if the device is dropped or receives a significant impact. To reduce the
risk of personal injury, avoid touching the screen if the glass is broken, chipped or
cracked and arrange to have the screen replaced. A cracked or chipped touch
screen caused by misuse or abuse of your device is not covered under the
product’s limited warranty.
２ Warning
Proper installation
To avoid hazards related to improper device installation, installation must be
performed by people who have read and understand the installation instruction