Microsoft Surface Hub 2 SmCamera - Manual (Page 466)

4. Make sure to clear the Back up system files to the recovery drive check box and
then select Next .
5. Select your USB drive, and then select Next > Create . Some utilities need to be
copied to the recovery drive, so this might take a few minutes.
6. When the recovery drive is ready, select Finish .
7. Double-click the recovery image .zip file that you previously downloaded to open
it.
8. Select all the files from the recovery image folder, copy them to the root of your
USB drive, and then select Choose to replace the files in the destination .
9. Once the files have finished copying, select the Safely Remove Hardware and Eject
Media icon on the taskbar and remove your USB drive.
10. Connect the USB drive to any USB-C or USB-A port on the Surface Hub 2S. Turn off
the Hub and then boot from the USB drive.
1. While pressing the Volume down button, press the Power button.
2. Keep pressing both buttons until you see the Windows logo.
3. Release the Power button but continue to hold the Volume down button until the
Install UI begins.
Figure 2. Volume and Power buttons
4. On the language selection screen, select the display language for your Surface Hub
2S.
Boot Surface Hub from USB drive
７ Note
If the device was unplugged or experienced an abrupt power outage or pulled
power cord, wait at least 15 seconds before attempting to boot from USB.