Wireless connect, Wired connect – Microsoft Surface Hub 2 SmCamera User Manual
Page 509
Since wireless connect is based on Miracast, you don’t need cables or additional setup
planning to use it. Your users can load Miracast on most Miracast-enabled Windows
devices. Then they can project their display from their computer or phone to the Surface
Hub screen.
Wired connect
With wired connect, a cable transmits information from computers, tablets, or phones to
Surface Hub. There are three video cable options, and they all use the same USB 2.0
cable. The cable bundle can include one or all of these connection options.
DisplayPort (DisplayPort cable + USB 2.0 cable)
HDMI (HDMI cable + USB 2.0 cable)
VGA (VGA cable + 3.5mm audio cable + USB 2.0 cable)
For example, to provide audio, video, and touchback capability to all three video
options, your Wired Connect cable bundle must include:
A DisplayPort cable
An HDMI cable
A VGA cable
A USB 2.0 cable
A 3.5mm cable
When you create your wired connect cable bundles, check the
Surface Hub (v1) 84" tech specs
sections for specific technical and physical
details and port locations for each type of Surface Hub. Make the cables long enough to
reach from Surface Hub to where the presenter will sit or stand.
Wireless connect