Surface hub v1 ssd replacement, Surface hub ssd replacement, Surface – Microsoft Surface Hub 2 SmCamera User Manual
Page 568: Hub ssd replacement
Surface Hub v1 SSD replacement
Article • 02/16/2023 • Applies to: Surface Hub v1
You might need to remove the solid state drive (SSD) from your Surface Hub so that you
can reimage it using the
or because you've been sent a
replacement drive. You would reimage your SSD when the operating system is no longer
bootable, such as from a Windows update failure, BitLocker issues, reset failure, or
hardware failure.
1. Locate the SSD compartment door on the rear, upper portion of the Surface Hub
in the locations illustrated below. The door is identifiable as it doesn't have open
ventilation slots.
Surface Hub hard drive locations
2. Locate the locking tab on the hard drive compartment door. On the Surface Hub
55, the locking tab will be located on the left-hand side of the door. On the Surface
Hub 84, it will be on the right-hand side as shown in the illustration.
２
Warning
Make sure the Surface Hub is turned off at the AC switch.